User's Guide

14.4.3 Format Memory Card
This setting allows you to erase all video and photo files stored on your memory card.
1. In SETTINGS mode, select ‘Format’ by using the UP or DOWN buttons. Press the
ENTER button to enter the ‘Format’ submenu.
2. Press the UP or DOWN buttons to navigate the submenu and select a setting.
3. Press the OK button to confirm your selected setting. You can select from
Confirmation, Cancel.
4. Press the MODE button to exit the settings menu without making a selection.
NOTE: Use extreme caution when accessing this setting. There is no way to recover
formatted media. Once you format your memory card, all recorded media will be
DELETED permanently and cannot be recovered.
14.4.4 Factory Reset
This setting allows you to reset all menu settings to the factory default settings. This function
will not delete any media stored on your memory card.
1. In SETTINGS mode, select ‘Factory Reset’ by using the UP or DOWN buttons. Press
the ENTER button to enter the ‘Factory Reset’ submenu.
2. Press the UP or DOWN buttons to navigate the submenu and select a setting.
3. Press the OK button to confirm your selected setting. You can select from
Confirmation, Cancel.
4. Press the MODE button to exit the settings menu without making a selection.
14.4.5 Firmware Version
This setting displays the current firmware version of your camcorder.
1. In SETTINGS mode, select ‘Firmware Version’ by using the UP or DOWN buttons.
2. The current firmware version will be shown on the screen.
3. Press the MODE button to exit the firmware version screen.