User's Guide

buttons. Press the ENTER button to enter the ‘Light Source Frequency’ submenu.
2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You
can select from Auto, 50Hz, 60Hz. The default frequency for the United States is
60Hz.
3. Press the OK button to confirm your selected setting.
4. Press the MODE button to exit the settings menu without making a selection.
14.3.7 LED Light Indicator
This function allows you to turn the LED Indicator Light on and off.
1. In SETTINGS mode, select ‘LED Light Indicator’ by using the UP or DOWN buttons.
2. Press the ENTER button to turn the LED Light Indicator On or Off, if the box has a
check mark, then the LED Light Indicator is On.
14.3.8 Auto Screensaver
This setting allows you to set the length of time before the LCD Screen turns off
automatically.
1. In SETTINGS mode, select ‘Auto Screensaver’ by using the UP or DOWN buttons.
Press the ENTER button to enter the ‘Auto Screensaver’ submenu.
2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You
can select from 10S, 20S, 30S, Close.
3. Press the OK button to confirm your selected setting
4. After the selected amount of time without input, the screen will power off. To wake the
screen back on, press any button.
5. Press the MODE button to exit the settings menu without making a selection.
14.3.9 Auto Shutdown
This setting allows you to set the length of time before the camcorder powers off
automatically.