User's Guide

3. Press the OK button to confirm your selected setting.
4. Press the MODE button to exit the settings menu without making a selection.
14.2.3 Auto (Auto Capture)
This feature allows you to capture a single photo at a set interval. It will continue to capture
a single photo after each time interval until stopped.
1. In SETTINGS mode, select ‘Auto’ by using the UP or DOWN buttons. Press the
ENTER button to enter the ‘Auto’ submenu.
2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You
can select from Close, 3S, 10S, 15S, 20S, 30S.
3. Press the OK button to confirm your selected setting.
4. Press the MODE button to exit the settings menu without making a selection.
Note: By selecting 10 Seconds, the camcorder will capture a single photo every 10
seconds. Each photo will be saved as a separate file on the memory card. When this
feature is active, press the OK button to start the countdown to the first photo
capture. A countdown will show on the bottom of the screen. To stop taking
additional pictures, press the OK button.
14.2.4 Drama Shot (Photo Burst)
This function allows to you capture consecutive photos with one click of the OK button.
1. In SETTINGS mode, select ‘Drama Shot’ by using the UP or DOWN buttons. Press
the ENTER button to enter the ‘Drama Shot’ submenu.
2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You
can select from Close, 3P/S (photos per shot), 5P/S, 10P/S.
3. Press the OK button to confirm your selected setting.
4. Press the MODE button to exit the settings menu without making a selection.