User's Guide

14.2 Photo Mode Settings
Overview
Your camcorder comes preset with some user-adjustable settings to fine tune and
customize how you would like your photos to be captured. The settings are already
optimized and preset for the easiest experience.
Before you begin, ensure you are in SETTINGS mode. From the main screen, press the
MODE button until a gear is shown on the screen. Press the ENTER button to access the
settings mode. Then, make sure that you are in Photo Mode Settings, the yellow line at the
top of the screen should be below the camera icon. Press the MODE button to move the
yellow line to the camera icon.
14.2.1 Photo Resolution
Your camcorder has a number of preset photo resolution sizes. A higher resolution will
produce a higher quality and larger file size photo.
1. In SETTINGS mode, select ‘Photo Resolution’ by using the UP or DOWN buttons.
Press the ENTER button to enter the ‘Photo Resolution’ submenu.
2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You
can select from 16M, 12M, 8M, 5M, 2M.
3. Press the OK button to confirm your selected setting.
4. Press the MODE button to exit the settings menu without making a selection.
14.2.2 Timed (Self Timer)
This function determines the time delay before a photograph is captured. This setting can
be used by photographers to take photographs of themselves.
1. In SETTINGS mode, select ‘Timed’ by using the UP or DOWN buttons. Press the
ENTER button to enter the ‘Timed’ submenu.
2. Press the UP or DOWN buttons to navigate the submenu and select a setting. You
can select from Close, 3S, 5S, 10S, 20S.