User's Guide

 LED Light Color Statuses
Blue LED: The camcorder is busy processing an image or video.
Yellow LED: WiFi is enabled. When flashing yellow, the WiFi is waiting to connect; when
solidly lit, WiFi is connected.
Red LED: The battery is charging.
 Recording Video
Once powered on, the camcorder automatically enters VIDEO mode. Press the ENTER button
to begin recording. The bottom of the screen will show a flashing red dot, denoting that video is
recording. Pres the ENTER button again to stop recording.
 Shooting Photographs
Once powered on, press the POWER button again to enter PHOTO mode. Press the ENTER
button to capture a photo. The upper left corner of the screen will show that you are in PHOTO
mode.
 Recording Slow Motion Video
Once powered on, press the POWER button twice to enter SLOW MOTION VIDEO mode.
Press the ENTER button to begin recording. The bottom of the screen will show a flashing red
dot, denoting that video is recording. Press the ENTER button again to stop recording.
 Playback on Camcorder
Once powered on, press the POWER button to cycle through the modes until you enter
PLAYBACK mode. Press the UP and DOWN buttons to cycle through your media. Press
ENTER to playback a video file. Press and hold the ENTER button for 3 seconds to delete a
single file.
 Connecting to a Computer
 Connect your camcorder to a computer with the included USB cable. Power the camcorder
on and the following prompts will display. 
