User's Guide

 Charging the Battery
 Connect the included USB cable’s small end into the camcorder’s USB input, and the larger
end into the AC adaptor. The LED will  in red and will  once the
battery is fully charged.
 You may use the camcorder for recording or playback while it is plugged into auxiliary power
(AC adaptor, computer, mobile charger).
 For the quickest charge, please ensure that the camcorder is powered off.
 Power On / Off
 Ensure that the battery is fully charged.
 Press and hold the POWER button for 3 seconds until the camcorder powers on. Press and
hold the POWER button again for 3 seconds to power off.
 Enabling / Disabling WiFi
 Enabling WiFi: Press the UP button once. The LED light will flash in yellow and the screen
will display the WiFi details.
 Disabling WiFi: Once the WiFi is enabled, press the UP button once. The yellow LED light
will no longer illuminate.
 Changing Modes
The power button also functions as the MODE button. Once the camcorder is powered on,
press the power button to cycle between Recording Videos / Shooting Photographs / Slow-
Motion Video / Burst Photo / Playback / Settings.