User's Manual

5
Sprintshield Touch is delivered with a loud 3 W Speaker for crystal clear alerts even
in noisy vehicle cabin surroundings. When using the Sprintshield Touch un-docked
the audio signal is routed to the built-in speaker so navigating the settings will
perform an audio feedback as well.
Sprintshield Touch layout
There are three buttons on the Sprintshield Touch housing.
1. Power button (mechanical button) – on the right side of the Sprintshield
Touch.
2. Back level-up button (touch panel button) - on the lower right side of the
bezel.
3. Drive-screen button (touch panel button) - on the upper right side of the
bezel.
All other buttons appear on the screen itself and are dynamic.
Powering on
By pressing the power button for 1 second or longer you will turn on the Sprintshield
Touch. It will also turn on automatically when it detects presence of 5 V charging
voltage on its docking station.