User's Manual

3
SIM-card socket is located on the back of the Sprintshield Touch under a rubber
protective door. Remove the door and slide the SIM-card locker to the right to unlock
the locker. Open the locker and insert the SIM-card. Be careful to properly orient the
SIM-card. Close the locker and return it to locked position to the left. Return the
rubber door for proper humidity and dust protection.
Docking Station overview
Docking station performs routing of several important lines from the Sprintshield
Touch to the outside.
- Power supply for charging of the internal battery and for operation while
docked. Cable 1,5 m in length with a USB-A connector. Can be plugged to a
supplied 12 V to 5 V adapter or to any USB charging socket.
- Speaker cable 1,5 m in length with a 3,5 mm female mono socket at the end.
Connect the supplied speaker to the socket.
- GPS SMA female pigtail cable is to be connected to the supplied external
GPS antenna.