Quick Installation Guide

8
At least one other trained person must be in attendance, who can immediately and safely
disconnect the system if necessary.
This second person must be trained in first aid for emergency purposes
Some parts of all electrical installations are energized. Failure to follow safe work
Practices and the safety warnings may lead to bodily injury and property damage.
For this reason, only trained and qualified personnel (electrical workers as defined in
IEC 60215 or EN 60215 + A1 or in the National Electrical Code or in ANSI/NFPA No. 10)
may install or service the installation.
Risk of electric shock
a) Do not open the AC adaptor housing. Make sure that the AC adapter does ot come in
contact with liquids.
b) Use Only the 3-pin power cord with equipment grounding conductor which was supplied
with your instrument and only on 3-pin grounded outlet must be used.
The Cooling vents at the right & left of the enclosure can become obstructed, preventing
ventilation of the enclosure.
Make sure that the air vent is not obstructed and remains clear at all times.