User guide

Phone Basics 15
Note: If your unlock sequence is set to a PIN or password, you will need to enter it to be able
set the unlock pattern.
Using Guest Mode
After you‟ve set up and enabled Guest mode, lock the screen so that you can enter your Guest
mode pattern. The Guest mode Home screen is displayed with only the apps you‟ve selected for
guest access. To exit Guest mode, enter your normal unlock pattern on the Lock screen.
Note: The Guest mode switch is automatically turned off if your lock sequence is changed
from Pattern. Otherwise, manually disable it if you no longer want to allow guest access.
Hardware Key Control Mode
If your phone display is damaged or broken, you can answer an incoming call, end a call, or turn
off an alarm using the hardware keys.
1. Turn your phone off.
2. Press and hold the Power/Lock Button and the Volume Keys at the
same time for more than 6 seconds to enter the Hardware key control mode.
3. Press the Volume Keys to scroll to the desired option, then press the
Power/Lock Button to confirm.
 Answer a call: Press either of the Volume Keys.
 End a call: Press the Power/Lock Button during a call.
 Stop an alarm: When an alarm rings, press and hold the Volume Up Key or
Volume Down Key to stop the alarm.
Note: If you use your phone with a broken display glass, your phone can break even more or
you can be injured. Make sure to visit the LG authorized service center to get your
phone repaired.
Battery and Charger
Sprint-approved or LG-approved batteries and accessories can be found at Sprint Stores or
through LG, or call 1-866-866-7509 to order. They‟re also available at www.sprint.com.
Non-Removable Battery
Your phone has an internal, rechargeable battery that should be replaced only by LG or an
authorized LG repair center. You should never try to open or take apart this phone yourself.
Opening the phone can cause damage that will void your warranty.