User's Manual

66 Section 3A: Your Card: The Basics (Windows)
Ending a Connection
To end a connection:
䊳 In the Mobile Broadband window, click Stop.
This ends your data connection, and also your GPS connection, if it is open.
If Enable Network Adapter (NDIS) (page 81) has not been selected and you exit
Sprint Connection Manager while a connection is in progress, a window opens
asking whether you want to disconnect the call. Click Ye s to end the connection
and exit Sprint Connection Manager. (See “Exiting Sprint Connection Manager”
on page 61.)
If Enable Network Adapter (NDIS) has been selected, manually disconnecting will
leave the card disconnected. It will not reconnect until you remove and reinsert
the card.
If GO automatically when ready (page 81) has been selected, manually
disconnecting will leave the card disconnected. It will not reconnect until one of
the following occurs:
䢇 You make a connection through Sprint Connection Manager
䢇 A GPS fix is successfully acquired after you initiate Sprint Location Services
(page 55)
䢇 You restart Sprint Connection Manager
Online Help
Sprint Connection Manager includes extensive online help to provide operating
hints and step-by-step instructions for getting the most from your card.
With Sprint Connection Manager running, you can access online help in several
ways:
䢇 Press <F1> when Sprint Connection Manager is the active window.
䢇 From Sprint Connection Manager, select MENU > Help.
䢇 Right-click the system tray icon ( ) and select Help.
The help file has a table of contents and an index.
Note: The Stop button in the GPS Receiver window ends only your GPS connection; data
may still be transferred.