Quick Start Guide

32 33
Integrating Your Shades with a Z-Wave Home Automation System Integrating Your Shades with a Z-Wave Home Automation System
Step 2: (Include) Add Your Shades and Remotes
to the Home Automation System
NOTE
You need to add the shades rst and then the remotes to your home
automation system.
Add Your Shades
1. From your home automation system’s user interface, select
the option to enroll a new Z-Wave device.
See your home automation system’s instructions for details.
2. On one of your shades, press and
hold the program button for 3
seconds. When the shade LED
flashes green, release the button.
The shade should appear as a found
Z-Wave device in your home automation
system’s user interface.
3. Repeat steps 1–2 for each shade.
Add Your Two-Button or Single-Channel Remotes
1. From your home automation system’s user interface, select
the option to enroll a new Z-Wave device.
See your home automation system’s instructions for details.
2. On one of your remotes, press and
hold the program button on the back
for 3 seconds. When the remote LED
flashes green, release the button.
The remote should appear as a found
Z-Wave device in your home automation
system’s user interface.
3. Repeat steps 1–2 for each remote.
Add Your Multi-Channel Remote
1. From your home automation system’s
user interface, select the option to
enroll a new Z-Wave device.
See your home automation system’s
instructions for details.
2. On the remote, press and hold the
MENU/RIGHT button to enter the menu.
3. Select ZWAVE > LEARN.
4. Repeat steps 1–3 for each remote.
Legend
Press and hold Move up
Press and release Move down