Instructions / Assembly
4
7
TOP VIEW
INSIDE VIEW
A B
A B
3
1
2
3
4
TIP - If you are having trouble inserting the cable sensors into the sensor mounts, try flipping them over.
They are designed to only fit one way.
Inside Person: Before installing the cables, note that they are dierent lengths and have dierent color labels.
Inside Person: Starting at sensor position , carefully cut the cable ties that are currently holding the sensor in
place. Take the cable with the WHITE tag and install the end cable sensor into the sensor mount. Once it is in place,
fasten with new cable ties as shown.
Inside Person: Then, working towards sensor position , install the cable into each cable clip, as shown.
Inside Person: At sensor position , install the middle cable sensor into the sensor mount and fasten the cable
ties.
Inside Person: Continue installing the cable into the cable clips until you reach position as shown above. Leave
the end of the cable hanging down near the controller.
Inside Person: Starting at sensor position , take the cable with the YELLOW tag and repeat the above process to
sensor position and then to position . Be sure to fasten the cable ties at each sensor.
3
2
2
4
1 A
B