Instructions / Assembly

6
3
TOP VIEW
A B
INSIDE VIEW
Outside Person: On the surface of your mat, locate the 4 black plastic sensor mounts. These are your 4 sensor
positions.
Inside Person: Starting at sensor position , locate the first mat rod holder to the le. Install a cable clip at the front
of the mat rod holder pocket, as shown.
Inside Person: Moving to the le around the trampoline, install ONE cable clip in front of each mat rod holder pocket
between sensor positions and . Do not install a cable clip in front of any of the sensor positions.
Inside Person: Repeat this process from sensor positions to and to .
NOTE
- Before proceeding, double check that each cable clip is pushed fully onto the edge of its
pocket and that there are no cable clips installed in front of any of the sensor positions.
3
2
2 1 1 4
3
?
1
2
3
4