Instructions / Assembly

Ensure your tablet has Bluetooth turned on. Take the tablet out to your trampoline.

Install 4 AA batteries into the battery pack and place the battery pack on the controller.

Make sure nobody is on or leaning against the trampoline.

Turn on the controller by pressing the button on the front and wait for it to connect to your tablet.

The GREEN light should now be pulsing, indicating that the controller is running. Please wait for at least 15 seconds

to allow the system to calibrate the sensors before touching the trampoline.

Start the tgoma app on your tablet. Aer a few seconds the BLUE light should begin pulsing, indicating that the

Bluetooth connection is established.

NOTE

- When you turn the controller on to connect to your tablet, ensure there is nobody standing on, sitting

on, or leaning against the trampoline for 15 seconds. This allows the controller to correctly set the sensors

for accuracy.

NOTE - The RED light will begin pulsing if there is an error with the system. The error will be described

underneath Tech Info on the General Settings page of the tgoma app.

TIP - tgoma is designed to work across a wide range of tablets. Not all versions of Android connect to

Bluetooth in the same way. Your tablet should automatically connect to a tgoma controller when you start

the tgoma app and turn the controller on. If the BLUE light on the controller does not light up aer

approximately 30 seconds, you may need to power o the tablet and restart it. This should allow the

Bluetooth connection to be established.