Manual

20
Assemble by reversing the order of disassembly.
Note: When replacing recoil assembly (Step 4), be
certain barrel clearance cuts on recoil spring guide
are aligned before inserting in slide. Be sure to flip
barrel link forward before installing slide assembly.
An improperly assembled firearm is
dangerous and should not be fired.
Always consult an experienced gunsmith
if you experience any difficulty or have any
questions concerning assembly procedure.
SECTION 3: ASSEMBLY
V-12, V-16, & LONG SLIDE MODELS
Note: 1911-A1 Ultra-Compact Pistols are designed
to use standard pressure ball ammo and self defense
loads. +P ammunition is not recommended in pistols
shorter than 5 inches. Use only clean, dry, original,
high-quality, commercially manufactured ammunition.
20
SECTION 4
:
DISASSEMBLY of MICRO-COMPACT,
ULTRA COMPACT, V-10, COMPACT,
& CHAMPION MODELS
If you decide to disassemble your Springfield
pistol, do so properly. Improper disassembly
and assembly will create unsafe conditions
that could result in injury or death or a gun
that simply will not work. Don’t take chances.
Do not attempt to disassemble this or any
other firearm until you have received training
and instructions from a competent gunsmith.