Manual

Step 2 - Full Length Guide Rod Removal

V-series and Long Slide Models contain full-length guide rods.

1. Use a 5/32 Allen wrench to remove the

front portion of the guide rod.

Step 3 - Slide Stop Removal

1. Align disassembly notch with slide stop.

2. Press slide stop shaft on right side of slide

and remove slide stop by pulling it out of

left side of frame.

SECTION 3: DISASSEMBLY

V-12, V-16, & LONG SLIDE MODELS

Recoil spring guide could eject out from the side as slide is

removed. To keep the recoil spring from ejecting sideways,

hold fingers around slide while moving it forward.

Step 4 - Slide Removal

Pull slide forward in its guides and remove slide.

Barrel, recoil spring plug, recoil spring, and guide

will come with it.

Step 4 - Recoil Spring Components Removal

Remove guide, recoil spring, and its plug through

back of slide.

SECTION 3: DISASSEMBLY

V-12, V-16, & LONG SLIDE MODELS

Step 5 - Barrel Removal

Tilt barrel link forward and remove barrel

through front of slide.