Installation Guide

FOR RETURN SHIPPING PUR

POSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Basic Accent Lamp

w/ Spring Clips

ASSEMBLY INSTRUCTIONS:

This is a generic illustration and may not be identical to your lamp.

Glass shapes and bases vary.

1. Place the lamp (A) base on a level surface.

2. Insert bulb into socket.

Pinch the two wire springs (B) and place the shade (C)

over the base.

Important:

Check the lamp socket for information on the maximum wattage

recommended for your specific lamp.

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth. Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Version#: SD-AC-SPC

Made in China / Revision 06/06/17

PAGE 1
Basic Accent Lamp w/ Spring Clips ASSEMBLY INSTRUCTIONS: This is a generic illustration and may not be identical to your lamp. Glass shapes and bases vary. 1. Place the lamp (A) base on a level surface. 2. Insert bulb into socket. 3. Pinch the two wire springs (B) and place the shade (C) over the base. Important: Check the lamp socket for information on the maximum wattage recommended for your specific lamp. Cleaning of your lamp. Unplug lamp, wipe with a damp cloth.
PAGE 2
Lámpara básica de acento con brazos de resorte INSTRUCIONES DE ASAMBLEA: Esta es una ilustración genérica y puede que no ser idéntica a su lámpara. 1. Coloque la base de la lámpara (A) sobre una superficie nivelada. 2. Inserte la bombilla en el zócalo. 3. Apriete los dos resortes de alambre (B) y coloque la pantalla (C) sobre la base Importante: Verifique el zócalo de la lámpara para obtener información sobre la potencia máxima recomendado para su lámpara específica.
PAGE 3
Hecho en China / Revision 06/06/17