Instructions / Assembly

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Basic Table Lamp

ASSEMBLY INSTRUCTIONS:

This is a generic illustration and may not be identical to your lamp.

1. Place the base on a level surface.

2. Insert the harp (B) until it sits firmly into the saddle (A).

3. Adjust the knurl nut (C) on harp (B).

This can be used to raise the shade a little if necessary.

• Fabric shaded lamps do not have a knurl nut.

4. Place the shade (D) over the end of the harp (B)

and tighten with the finial (E) securing the shade in place.

5. Insert the bulb into the bulb socket.

Important:

Check the lamp socket for information on the maximum wattage

recommended for your specific lamp.

Cleaning of your lamp.

Unplug lamp, wipe with a damp cloth. Do not use abrasives

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Version#:SD-TL-H

Made in China / Revision 08/09/16

PAGE 1
Basic Table Lamp ASSEMBLY INSTRUCTIONS: This is a generic illustration and may not be identical to your lamp. 1. Place the base on a level surface. 2. Insert the harp (B) until it sits firmly into the saddle (A). 3. Adjust the knurl nut (C) on harp (B). This can be used to raise the shade a little if necessary. • Fabric shaded lamps do not have a knurl nut. 4. Place the shade (D) over the end of the harp (B) and tighten with the finial (E) securing the shade in place. 5.
PAGE 2
Lámpara de mesa básicos INSTRUCIONES DE ASAMBLEA: Esta es una ilustración genérica y puede que no ser idéntica a su lámpara. 1. Coloque la base sobre una superficie plana. 2. Inserte el arpa (B) hasta que se asiente firmemente en la silla de montar (A). 3. Ajuste la tuerca moleteada (C) en el arpa (B). Esto puede ser usado para elevar la pantalla un poco si es necesario. • lámparas de tela pantella no tienen una tuerca moleteada. 4.