User's Manual

44
In order to download a new update you need to be registered at www.open-
e.com. You also have to remember to setup correct DNS and Gateway address
in “setup” -> “network menu”.
5.2.2.5 S.M.A.R.T.
Function: S.M.A.R.T. e-mail notification
This function allows you to check S.M.A.R.T. status of hard disks and send it to
e-mail address.
S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) is a monitoring
system for computer hard disks to detect and report on various indicators of
reliability, in the hope of anticipating failures.
In order to enable S.M.A.R.T. e-mail notification, you have to first enable E-mail
notification function in setup -> administrator menu, then enable S.M.A.R.T. in
Console tools at special options (press F1 on console to find out keyboard
shortcuts).
When S.M.A.R.T. is enabled you will see all detected hard drives with information
about unit number, size and serial number.
Select the checkbox of unit, form which you want to receive S.M.A.R.T. status
and press "apply". If everything is ok, then status will be PASSED, in another case
FAILED.
It will be possible to enable S.M.A.R.T. when all hard disks support it and
it is enabled in BIOS settings.
5.2.3 Status
This function provides you with a quick overview of the most important system
parameters of your Open-E iSCSI. The corresponding sub-functions are network,
hardware and S.M.A.R.T.