User's Manual

Function “Target Volume Manager”

By using this function you can add available target volumes in premises of one

target. In case of defining more than one target – free volumes will be available in

actually edited volume. Analogically as with SCSI devices, it is possible to define

LUN address device.

Function “Target IP Access”

You can assign network classes or specify individual IP addresses that have

permission to access the target. Entries should be delimited by commas. When

no entries are present everyone is permitted to access the target. Specifying at

least one entry excludes all the clients that do not match it from accessing the

target.

Please note that already active sessions to the target will persist regardless of the

newly applied settings. You can ensure that the settings are in force immediately

after you apply them by going to maintenance->shutdown->Connection reset

and resetting the connections manually. Keep in mind that all the unsaved client

data might be lost.