User's Manual

• option: -p is a port for Remote Access.

• option: -l is a user (In our product the user must be "cli").

• option: address_ip is a address of server you want to connect to.

You will be ask for a password you entered on server for Remote Access.

To connect to server from Microsoft Windows, download free ssh client Putty

(www.putty.nl).

• In Host Name (or IP address) field please enter IP address of the server

• In Port field please enter the same port as in the server GUI (default 22222)

• In Protocol please choose SSH

• In Category: Connection -> Data -> Auto-login-username please enter: "cli"

• In Terminal -> Keyboard -> The Function Keys and keypad please select

"VT100+"

• Go back to Category Session, enter session name in field Saved Sessions and

click on "Save" button.

• Then click on new saved session, click "Open" and enter the "password". (In

case you did not enter Auto-login-username, it will prompt for username, so

please enter: "cli")

5.2.1.4 Hardware

Function: “UPS configuration”

In the function you can select a UPS device desired (Uninterrupted Power

Supply). For the connection of the UPS device to the Open-E iSCSI, the USB port

is most frequently used.

In the settings you can select the UPS model, cable type, connection port and

the length of the time out. The time-out defines the time between a power failure

and the moment the system will shut down. UPS support in mode “Single”