User's Manual

5 Description of functions

5.1 Functions of the console display

While Open-E iSCSI can be fully administered remotely through a secure Web

interface, some of the functions you can access on the console. Open-E iSCSI

constantly displays following basic parameters:

• IP address

• Https settings

CTRL+ALT+n

If you press the left CTRL key + the left ALT key + n, you will be asked for the new IP

address and the subnet mask. The DHCP server will be shut down.

CTRL+ALT+p

If you press the left CTRL key + the left ALT key + p, the access restrictions are lifted

by entering the administrator password (in addition, there is a reset to the standard

https port 443).

CTRL+ALT+i

By pressing a combination of left CTRL key + left ALT key +i, you can reset the

original IP address (192.168.0.220) and the subnet settings (255.255.255.0). In this

process, the DHCP server support is turned on.

CTRL+ALT+t

By pressing a combination of left CTRL key, left ALT key and t, you can run Console

Tools. The menu will appear, with choice of following functions: Ping, DHCP Ping,

Hardware info, Memory info, Time configuration, DNS configuration, Language

settings, Modify driver option and Boot option.

CTRL+ALT+x

By pressing the left CTRL key, left ALT key and x, it will display extended tools.

CTRL+ALT+r

By pressing the left CTRL key, left ALT key and r, it will display CLI Management Tools

for ICP Vortex.

This function appears in Help Console only when an ICP Vortex hardware

RAID controller is installed in the iSCSI system. In order to get additional

information read the user manual of ICP Vortex RAID controller manufacturer.

CTRL+ALT+h

By pressing the left CTRL key, left ALT key and h, it will display hardware and driver

information.