User's Manual

18
How to connect iSCSI in Windows 2000/XP/2003:
a.
First, you have to install the iSCSI Initiator package. You must be logged in as
administrator to install the Microsoft iSCSI Software Initiator package,
b. Next, launch iSCSI Initiator software,
c. If you set passwords on iSCSI and Target Access, press on branch “Initiator Setting”
in “Initiator CHAP secret”, enter your passwords, and after entering each click “Save”
button (your passwords is “Target secret”),
d. In branch: “Target Portals” click button “Add”, then enter your Open-E iSCSI IP
address,
e. Next click “Advanced…” button, and mark “CHAP logon information”, next give User
name and Target secret and then click “O.K.” button,
In the branch “Available Targf. ets” you will see name of available iSCSI targets e.g.
g. in
press “O.K.” button, then the chosen target status will change for
h. control panel Æ administrative tools Æ computer management
i. use them you
have to format them and mount to the system as a next disk letter.
“iqn.2005.05:iscsi.target0”,
Click “Log On” button, and if you entered password, you have to do the same as
point “e”, then
“Connected”
Next choose settings Æ
Æ disk management,
Now all available iSCSI TARGET drives will be displayed. In order to
Initiator for more details, which you can also find on Microsoft website.
Microsoft iSCSI Initiator ver. 1.06 does not support dynamic disk. Target
password must consist of minimum 12 and maximum 16 alphanumeric
characters. Please read Manual and Release Notes of Microsoft iSCSI
ose
the menu Web
Interface “setup” Æ “server” in Function “Clock settings”
Please do not ignore time settings on Open-E iSCSI and client station. Th
settings must be the same. Time can be synchronized in