User's Manual

15
4.5 Adding Disk Units
Please select “setup” Æ “target manager” and then “volumes” on the left page. After
selecting “volumes” you will find a list of all logical units. To add a new unit to the
iSCSI, please click “Add”. After the initializing procedure, the status of the unit will
change from the “Add” button into “in use, vg0”.
Please note that you can expand the storage capacity by adding new disk drives. In
the “Unit Manager” Function Open-E iSCSI will show both “in use” and “new units”. In
order to add a new unit to the Volume Group (vg0), please simply click 'Add' after
which Open-E iSCSI page will be restarted (see below).
4.6 Creating iSCSI targets volume
Next, by clicking on the branch “vg0” you can add disk volume to new “targets volume
(tgv)” and snapshot or increase size on existing tgv's and snapshot (you can't
decrease tgv size and snapshot). To set needed tgv size just use scrollbar, next to it
on the right side it shows the available size to use (see below).