Product Manual

4. ELECTRICAL HOOK-UP: The voltage, phase, and amperage draw of

the machine are listed on the serial number plate. The wiring diagram

is either with this manual or inside the control box (make sure the

amperage draws listed on the siring diagram and serial number plate

coincide). After the electrician connects power, he should check

rotation of all motors. Hopefully, the electrician can be present for

“start-up” in case a problem arises.

5. DRAIN CONNECTIONS: The unit has a 2” NPT coupler for draining

the tank.

6. WATER AVAILABILITY: Make sure that a water line is available so

that you can add water to the tank on a daily basis.

III. CHEMICAL SELECTION

CAUTION KleenTec’s detergents are characterized as “generally safe” on all

metals. This is not an absolute guarantee. If the parts are critical, it is

the customer’s responsibility to perform any and all metallurgical

tests.

CAUTION KleenTec does not warranty their product against rust. Rust will occur

if the wrong detergent is used, if the start-up procedure is not

followed, or if the machine is not used on a regular basis (should oil

the inside).

Using the correct detergent is critical to the performance and

longevity of your jet washer. The detergent must be formulated for a

mild steel jet washer, meeting the following criteria:

1. The detergent must have rust inhibiting agents to protect the

mild steel machine and your steel parts. Once rusting starts, it

can be hard to stop.

2. The detergent should be strong enough to remove the

contaminants, but not so strong that it attacks the metal

substrate.