Product Manual

1. SHIPPING DAMAGE: IF ANY DAMAGE IS FOUND, NOTIFY YOUR
CARRIER IMMEDIATELY AND SAVE ALL CRATING MATERIALS
FOR THE CARRIER’S INSPECTOR TO EXAMINE. FAILURE TO
PROMPTLY REPORT DAMAGE COULD RESULT IN DENIAL OF
YOUR CLAIM. A trucking companies procedure for handling damage
claims is as follows:
1. Immediately send out an inspector. An inspection report is
filled out on the spot, a copy of which is given to the
customer;
2. The CUSTOMER has to call the carrier to request a claim
form;
3. The customer mails in the claim form and;
4. The claim usually takes two (2) months to process.
IF A UNIT IS SERIOUSLY DAMAGED, YOUR DEALER MAY BE
ABLE TO INTERVENE, REQUESTING THAT THE DAMAGED UNIT
BE RETURNED AND A NEW UNIT DELIVERED.
2. UNPACKING: To prevent shipping damage some parts may have
been packed inside the machine.
 Cut and remove any plastic ties connected to the turntable.
3. LOCATION: Consider the factors below when choosing a location:
 If the unit is not vented with a blower, a considerable amount of
steam will enter you plant. Make sure this steam will have no
adverse affects in the surrounding area.
 The process of removing wet parts from the machine will inevitably
result in some water or solution spilling onto the floor. Consider
traction mats around the machine and avoid placing the machine
next to a walkway.
 Allow room for your utility connections and for service. You will
need 36” to unscrew the heating elements.
 Make sure the site is level.
5