Product Manual

 THE WASH CYCLE/FILTRATION
When the door is closed, the 0-60 minute “WASH” timer starts the wash cycle as
soon as it is turned. Generally, a 20-minute wash cycle is more than sufficient to
remove the contaminants.
During the wash cycle, the solution hits the parts and then returns to the tank via
a removable filter basket located beneath the turntable.
A limit switch assures that the wash pump can only operate when the door is
closed. The limit switch is for safety and is not to be used to purposely stop the
cycle. Wait until the wash timer reaches zero before opening the door.
 OIL SKIMMER
The skimmer has an 11 1/2” disc that is partially submerged. The floating oils
adhere to the disc and subsequently get wiped off and run into a bucket.
The skimmer is controlled by a push button switch on the control panel. The
skimmer timer allows the skimmer to operate for 45 minutes. DO NOT operate
the skimmer while the machine is washing parts
II. INSTALLATION
DANGER This machine utilizes HIGH VOLTAGE. Have a certified electrician do
all electrical work. Always disconnect power when opening an electric
box.
CAUTION The vibration en route could have loosened one or more wire
connections. Before connecting power, the electrician should check
all screw connections in the control and junction boxes.
CAUTION The electrician must check rotation of all motors.
CAUTION Don’t turn on the heaters until the tank is full. However, to avoid rust,
don’t fill the tank until you are ready for “start-up”.
4