Product Manual

Pump motor comes on but not pumping
or pumping very little
Pump motor won’t go on, but gear motor
works
Pump & gear motor is not working
Nozzles clogging frequently manifolds
need to be cleaned
Solution is foaming
Getting rust inside the cabinet
Oil skimmer is not working
defective/check settings
12
1. Water level is too low
2. Pump is rotating backwards (see
arrow on motor)
3. Pump is broken
4. Solution is foaming
5. Spray manifolds or filters clogged
with dirt
6. Solution temperature is too
high/boiling
7. Something caught in pump
1. Pump motor has internal problems.
Call factory.
2. If motor doesn’t run check motor
contacts.
1. Defective motor starter
2. Defective wash timer
3. Defective door limit switch
1. Filter basket, tank, and/or spray more
often
1. Wrong detergent. Not designed for a
jet washer
2. Started wash cycle when solution
was cold
3. Concentration is too low. Add more
detergent
4. Water level is too low
5. Add defoamer
1. Wrong detergent. Remove rust and
use detergent with rust inhibitors
2. Did not use the machine enough in
the first couple of days/remove rust,
charge with two times the normal
detergent level, and run the pump
continuously for 1-2 days
3. Machine is used too infrequently
1. On/Off switch is defective.
2. Small motor on the skimmer is
defective
3. Wiper blades too tight against disc