GRAVITY FEED SPRAY GUN SP351 SP351 PISTOLA DE GRAVEDAD 3 REGULADORES VASO DE PLASTICO
Adjustment ................................................................... 4 Parts List ...................................................................... 5 Maintenance/Storage/Troubleshooting ........................ 6 G INDEX / SAFETY 6 Mantenimiento/Almacenaje/Problemas .................... 4 5 Ajuste ....................................................................... Lista de Partes .........................................................
spray Air inlet Nozzle size Air pressure range Max. pressure of air Cup capacity Consumption Pattern Width Weight 1/4” (6.35 mm.) 0.05“ (1.4 mm.) 2-3.5 bar (28.8 - 51psi) 8.3 bar (120psi) 600cc platic cup 118-201 I/min (4.2 - 7.1cfm) 150-180 mm. (5.9”-7.1”) 0.70 kgs (1.54 lbs) 1. After unpacking the product, inspect carefully for any damage that may have occurred during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service. 2.
Ajuste Aqui la aplicación resulta mas leve Aqui la aplicación resulta mas gruesa 15 a 30 cm Aplicación debe resultar humedo y uniforme Movimiento de Pistola Comienza Presionar aplicación disparador Termina Soltar disparador aplicación CORRECTO INCORRECTO Adjustment
23 24 25 26 27 15 16 28 29 30 11 12 13 14 Atomization Nut Fluid Cap Washer 31 32 27 28 29 30 47 Fluid Inlet Joint Washer 48 Cup Filter 43 44 45 46 Brush Tool Wrench Hex. Wrench 1 2 Air Adj. Screw Air Adj. Knob 17 18 Fluid Nozzle Fluid Nozzle Joint 33 34 Fluid Inlet Joint Fluid Adj. Needle 3 O-ring 19 Joint Washer 35 Fluid Needle Spring 4 5 6 Washer Air Valve Spring Air Inlet Valve 20 21 22 Direction Screw Paint Needle Washer Locking Spring 36 37 38 Joint Fluid Adj.
6 6
Disclaimers and Limitations of Remedies This warranty gives you specific legal right, and you may also have other rights which may vary from State to State.
