MSDS

SECTION
5
–
FIRE FIGHTING MEASURES
FLASH POINT / METHOD
>200°
FLAMMABLE
LIMITS
ND
% VOLATILE
NA
EXTINGUISHING MEDIA
Dry chemical, alcohol foam, water mist
SPECIAL FIRE FIGHTING
PROCEDURES
Firefighters should wear a self-contained breathing apparatus as in all chemical fires.
FIRE AND EXPLOSION
HAZARDS
None
SECTION 6
–
ACCIDENTAL RELEASE MEASURES
RESPONSE
TO SPILLS
Stop leak. Absorb material with an inert material, place in a appropriate container for disposal. Do not
allow spilled material to enter drainage systems or open water courses.
SECTION 7
–
HANDLING AND STORAGE
HANDLING
PRECAUTIONS
Wash hands before eating.
Keep container tightly closed when not in use.
STORAGE
PRECAUTIONS
Store away from heat and sparks.
SECTION 8
–
EXPOSURE CONTROLS
/ PERSONAL
PROTECTIONS
HYGIENIC PRACTICES
Normal procedures for good hygiene. Observe label precautions. Use personal
protection equipment.
ENGINEERING CONTROLS
Use general mechanical ventilation to remove vapors at the source.
Eyewash station is recommended.
RESPIRATOR
Not required in open air environments
X
GOGGLES / FACE SHIELD
Required: goggles should be chemical splash type
APRON
Not required
X
GLOVES
Required: PVC, Neoprene, Nitrile acceptable
BOOTS
Not required
SECTION 9
–
PHYS
ICAL AND CHEMICAL PROPERTIES
APPEARANCE
Light Clear Orange liquid
BOILING POINT
200 °F
ODOR
Orange Odor
VAPOR PRESSURE
44 mmHg @ 68F
PH
7 to 8 (10% Active Solution)
VAPOR DENSITY
NA
SPECIFIC GRAVITY
0.94 ( Limits 9.4 to 9.8)
EVAPORATION RATE
(butyl acetate=1)
< 1
SOLUBILITY IN WATER
Soluble