User Guide

Conference Mate
ENDING A CALL
Press Answer/End Call to end the call or end the call via your phone
in the normal way.
ADJUSTING THE VOLUME
Press + or - to the desired volume level.
THE MUTE FUNCTION
During a call, you can press to mute Conference Mate’s Microphone,
and the Mic Mute light will be on while in muting mode. Press it again
to cancel Mic Mute.
MUSIC PLAYBACK
Via Bluetooth® pairing: Connecting to a Bluetooth® A2DP cell phone
or a Bluetooth® device.
• Make sure your cell phone or Bluetooth® device has already
established an A2DP connection with Conference Mate™.
• You can listen to your music from Conference Mate™ while using
your Bluetooth® cell phone or other Bluetooth® device for playback.
• Adjust the volume: Short press + and - to adjust the volume.
• Press Answer/End Call to start or pause music playback. The
Answer/End Call LED will flash.
Note: The item above depends on your mobile phone, some
models may not support this function
Via 3.5mm audio input
• Connect your mp3 player or other device using a 3.5mm to 3.5mm
audio cable. Plug one end of the cable in Conference Mate’s input
jack and the other end into your music player’s headphone output
jack.
• Disable Bluetooth® pairing on any device that was paired with
Conference Mate™ as some devices will automatically re-pair, and
prevent playing through the cable.
• You can listen to your music from Conference Mate™ while playing
music on your music player or mobile phone. Use that device for
volume control.
Please Note:
1. The blue LED will be on.
2. When you listen to music using Conference Mate’s input jack,
Conference Mate’s Bluetooth® function is disabled. If you want
to use the Bluetooth® function, unplug the 3.5mm audio cable.
8 9
Usage Guidelines