User Guide

Conference Mate

PAIRING

1. Turn the ON/OFF switch to the right. Conference Mate™ will enter

pairing mode, and the blue and red LEDs on the unit will ﬂash

alternately.

2. Activate Bluetooth® on your mobile phone (or other Bluetooth®

enabled device) and search for Bluetooth® devices (if in doubt

please refer to your smartphone’s user manual for details on

activating Bluetooth®).

3. Follow your smartphone’s instruction guide to connect to a

Bluetooth® device. Typically, you will click on a Bluetooth® icon and

click Discover device. Select ‘Conference Mate’ from the list.

4. If pairing was successful, the blue LED indicator will ﬂash for 5

seconds.

5. If pairing fails, please repeat the process.

Note: In pairing mode, Conference Mate™ will enter sleep mode if no

device paired successfully after 4 minutes. You must turn Conference

Mate™ OFF and back ON.

PAIRING VIA NFC (NEAR FIELD COMMUNICATIONS)

1. Turn on the NFC function in your mobile phone.

2. Turn the ON/OFF switch to the right. The unit will enter the pairing

mode, and the blue and red LEDs on the unit will ﬂash alternately.

3. Place your mobile phone in or near the middle of the center ring,

where the NFC antenna is located.

4. Follow your mobile phone’s instructions to complete the pairing

process. Note: Conference Mate™, as all Bluetooth® speakers, only

remembers the last paired device.

ANSWERING A CALL

When there is an incoming call, you will hear ringing through

Conference Mate™, and both the Answer/End Call and Mic Mute areas

will ﬂash. Press Answer/End Call to accept the call, or answer the call

via your phone in the normal way.

REJECT A CALL

When there is an incoming call, you will hear ringing through Conference

Mate’s speaker. Press Mic Mute to ignore the call.

6 7

Pairing