AUTOPRIME ACE RANGE CENTRIFUGAL PUMP OPERATORS INSTRUCTIONS AUTOPRIME ACE RANGE DIESEL DRIVEN MOBILE PUMPS SPP Pumps Limited Crucible Close Mushet Industrial Park Coleford, Glos ENGLAND GL16 8PS Telephone: ++44(0) 1594 832701 Fax: ++44(0) 1594 836300 Document No: Revision No: W72-019E 4 Revision Note No: Date Issued.
DECLARATION OF CONFORMITY SPP Pumps Limited We Pump Model ACE80 ACE100 Crucible Close Mushet Industrial Park Coleford Gloucestershire England GL16 8PS Of Sound Level (dB) Measured Guaranteed LWA 106 109 106 109 2000/14/EC- Guaranteed sound power level.
Operators Instructions for ACE80/100 Diesel Driven Centrifugal Pumps CONTENTS 1. INTRODUCTION.............................................. 4 2. SERIAL NUMBER ........................................... 4 3. SAFETY PRECAUTIONS ................................ 5 3.1 Safety Symbols .................................................................5 3.2 Pump Safety Precautions .................................................5 4. HANDLING & TRANSPORT ........................... 5 4.1 Lifting .....
Manual No/Rev W72-019E / 4 Operators Instructions for ACE80/100 Diesel Driven Centrifugal Pumps 1. INTRODUCTION The purpose of this handbook is to provide operating guidelines and routine maintenance instructions for the SPP AUTOPRIME ACE Range of mobile diesel engine driven pumps. Instructions and statements contained within this handbook are given with our best intentions and are correct at the time of compilation. They are subject to alteration at any time.
Operators Instructions for ACE80/100 Diesel Driven Centrifugal Pumps Manual No/Rev W72-019E / 4 3. SAFETY PRECAUTIONS 3.1 Safety Symbols 2.2.10 Safety instructions within this manual are marked with the following symbols: This symbol refers to general mechanical aspects of safety. 4. HANDLING & TRANSPORT This symbol refers to electrical safety. 4.1 Lifting The central lifting eye is designed for lifting only the pump unit as supplied by SPP Pumps Limited.
Manual No/Rev W72-019E / 4 Operators Instructions for ACE80/100 Diesel Driven Centrifugal Pumps 5. OPERATING INSTRUCTIONS 5.3 After Starting 5.3.1 The pump will prime automatically once the suction hose is submerged. If the pump fails to prime refer to the fault finding guide. (Section 8) 5.3.2 If the pump continually snores, gradually release the surge control valve until the vibrations reduce. 5.1 Before Starting 5.1.1 Read this Handbook carefully. 5.1.
Operators Instructions for ACE80/100 Diesel Driven Centrifugal Pumps Manual No/Rev W72-019E / 4 6. PUMP MAINTENANCE CHART For engine maintenance periods refer to the engine operators handbook supplied with this manual. PERIOD TASK Daily Visually check for leaks. Check for vibration. Check the mechanical seal oil level and top up as required. Weekly or 100 hrs Check all fastener security. Check the condition of the lifter bracket/frame and check the security of attachment to the unit.
Manual No/Rev W72-019E / 4 Operators Instructions for ACE80/100 Diesel Driven Centrifugal Pumps AIR FILTER 7.5 Mechanical Seal Assembly 7.5.1 7.5.2 7.5.3 7.5.4 7.6 Assemble the engine adaptor plate on to the engine and press the stationary seat in to the plate ensuring not to damage the face. Replace the rotating part of the seal preferably with SPP tool no 22743 and push it up until the circlip groove is exposed behind the seal.
Manual No/Rev W72-019E / 4 Operators Instructions for ACE80/100 Diesel Driven Centrifugal Pumps 8. FAULT FINDING GUIDE Disconnect suction hose Blank off suction entry Fit vacuum gauge Pump Fails to Prime Are all plugs tight? NO Rectify & re-test Reading between 85 - 89 .5 kpa (28.5 0 30 ft H20)? NO Check vertical suction lift YES YES Move Pump Test the Vacuum Pump directly Fit vacuum gauge Lift< or = 8.53m (28ft) for ACE80/100 YES NO Reading between 85 - 89 .5 kpa (28.
Manual No/Rev W72-019E / 4 Operators Instructions for ACE80/100 Diesel Driven Centrifugal Pumps 9. TECHNICAL DATA CHARACTERISTICS Vacuum Pump Solids Handling Capability Engine Type Fuel Tank Capacity Approx. Running Time On Full Tank Impeller Back Plate Clearance Impeller Front Plate Clearance Mechanical Seal Coolant/Lubricant Weight Dry (No fuel in tank) Weight (With full fuel tank) Hitch Weight Dry Towing Hitch Types Flange Drilling ACE80/100 ACE80/100 25 ft3/min 25 ft3/min 40 mm Diameter 1.
Operators Instructions for ACE80/100 Diesel Driven Centrifugal Pumps Manual No/Rev W72-019E / 4
Manual No/Rev W72-019E / 4 Operators Instructions for ACE80/100 Diesel Driven Centrifugal Pumps 10. SPARES & SERVICE SPP Pumps operate a comprehensive Spares and Service support network throughout the world, and can be contacted as follows: SPARES & SERVICE Telephone: For spare parts, supply only. Ask for - For breakdowns, spare parts and on-site fitting, pump installation and commissioning, and service contracts. Ask for For breakdowns outside office hours.