Owner's manual

Operators Instructions for
HYDRAFLOW S4T Hydraulic Submersible Pump
Manual No/Rev
W79-008E / 4
Our policy is one of continuous improvement and we reserve the right to alter specifications at any time
Page 11 of 12
8.2 Parts List
Always mention serial # when ordering parts
Item Part # Description
1 HT0802174 Quick disconnect hose coupling, female
2. HT0802175 Quick disconnect hose coupling, male
3. HT4002276 Hydraulic Hose Assy. (12" length)(2 req.)
4. HT4002279 Lifting Bracket
5. HT4002152B Hydraulic Motor (Geartek)
6. HT0001549 Hex Nut (4 required)
6a.
HT0000163
Lock Washer (4 r
equired)
6b.
HT4001550
Stud (4 required)
7. HT4002254 "O" Ring
8. HT4002156 Bearing (upper)
9. HT4002190A Shaft, Splined
10. HT4002155 Bearing Housing
11. HT4002171 Plug
12. HT4002191 Bearing (lower)
13. HT4002159 Snap Ring
14. HT4002161 "O" Ring
15. HT4002192 Seal Plate
16. HT4002181 "O" Ring
17. HT4002194 Impeller
18. HT4002168 Volute
19. HT4002178 Strainer
20. HT4002180 Hex Head Bolt w/Washer (3 required)
21. HT4002183 Retaining Washer
22.
HT4002172
Socket Head Locking Screw
23.
HT4002
193
Shaft Seal Assembly
24. HT4002167 Gasket
25. HT4002166 Discharge Flange
26. HT4002165 Hex Head Bolt w/Washer (2 required)
27. HT4001535 Hex Head Bolt w/Washer (3 required)
28. HT4001535 Hex Head Bolt w/Washer (3 required)
29. HT4002164 Handle (2 required)
30. HT4001539 Hex Head Bolt w/Washer (4 required)
Item not illustrated:
HT4002195
"O" ring kit