HYDRAFLOW HYDRAULIC SUBMERSIBLE PUMPS OPERATORS INSTRUCTIONS S3T Pump Pump Weight 11 Kg Aluminium or 22 Kg Cast iron SPP Pumps Limited Crucible Close Mushet Industrial Park Coleford Gloucestershire GL16 8PS Telephone: ++44(0)1594 832 701 Fax: ++44(0)1594 836 300 Document No: Revision No: Revision Note No: W79-007E 4 Windchill Date Issued.
DECLARATION OF CONFORMITY We SPP Pumps Limited Of Crucible Close Mushet Industrial Park Coleford Gloucestershire GL16 8PS Declare that: HYDRAULIC DRIVE SUBMERSIBLE PUMP HYDRAFLOW S3T As shown on the Pump Nameplate Equipment: Model/Type: Serial Number: In accordance with the following Directive: 2006/42/EC Machinery Directive have been designed and manufactured to the following specifications: EN 809:1998+A1:2009 Pumps and Pump Units for Liquids - Safety Requirements EN 12100:2003 Parts 1 and 2 -
Operators Instructions for HYDRAFLOW S3T Hydraulic Submersible Pump Manual No/Rev W79-007E / 4 CONTENTS 1. INTRODUCTION 4 1.1 1.2 1.3 Power Unit Hydraulic Hoses Submersible Pumps 4 5 5 2. SAFETY PRECAUTIONS 5 2.1 2.2 Safety Symbols Submersible Pump Safety Precautions 5 5 3. TRANSPORT & STORAGE 6 3.1 3.2 Transport Storage 6 6 4. SERIAL NUMBER 6 5. OPERATING INSTRUCTIONS 6 5.1 5.2 Pump Installation Operation 6 6 6. PUMP MAINTENANCE 6 6.1 6.1.1 6.1.2 6.2 6.3 6.4 6.
Operators Instructions for HYDRAFLOW S3T Hydraulic Submersible Pump Manual No/Rev W79-007E / 4 1. INTRODUCTION The purpose of this handbook is to lay down operating guidelines and routine maintenance for the HYDRAFLOW S3T hydraulic drive submersible pump. circuit will cause damage to the unit and will void the warranty! The pump Is capable of a wide range of applications as it is not subject to normal suction lift limitations.
Operators Instructions for HYDRAFLOW S3T Hydraulic Submersible Pump If you are not sure if the hydraulic power source being used to drive this pump is properly sized or connected, call Sterling Fluid Systems Limited. hoses are fitted incorrectly, damage or danger may result. The hoses are supplied with quick release couplings that must be correctly fitted before starting the pump. Due to these selfsealing couplings, the hoses will remain filled with oil when not in use.
Manual No/Rev W79-007E / 4 2.3.2 2.3.3 Operators Instructions for HYDRAFLOW S3T Hydraulic Submersible Pump Check the type of liquid being pumped before working on the pump. Residues could be hazardous to your health. If in doubt flush out with clean water before work commences. Personnel working on the pump unit must always wear clean correctly fitting clothing and safety footwear.
Operators Instructions for HYDRAFLOW S3T Hydraulic Submersible Pump Look especially for a darkening in colour as an indicator of reduced lubrication performance or contamination and arrange to drain the system, clean the tank and replace with new oil. 150SSU @ 38°C (100°F) or equivalent specification.
Manual No/Rev W79-007E / 4 Operators Instructions for HYDRAFLOW S3T Hydraulic Submersible Pump 6.5.3. Screw impeller onto shaft and lightly tap on vane to tighten. 6.5.4. Install cone washer and socket head screw and tighten while holding impeller firmly. 6.5.5. Install drive assembly into volute making sure "O" ring (#10) is in place. 6.5.6. Install handle. 6.5.7. Fill oil chamber in top cover (approx. 1 oz.). 6.5.8. Test spin pump before using to check for leaks. 6.
Operators Instructions for HYDRAFLOW S3T Hydraulic Submersible Pump Manual No/Rev W79-007E / 4 7.
Manual No/Rev W79-007E / 4 Operators Instructions for HYDRAFLOW S3T Hydraulic Submersible Pump 8. PUMP SECTION DRAWING AND PARTS LIST 8.
Operators Instructions for HYDRAFLOW S3T Hydraulic Submersible Pump Manual No/Rev W79-007E / 4 8.2 Parts List Always mention serial # when ordering parts Item Part # Description 1. HT0009300 Hex Head Bolt (4 req.) HT0009301 Lockwasher (4 req.) 2. HT1009302 Strainer/Trash HT1009295 Strainer/Water with Plugs (opt.) 3. HT1009303 Volute (Aluminum) HT1009488 Volute (Ductile Iron) 4. HT1009305 Wear Ring 5. HT0009307 Impeller Retaining Screw, Socket Head 6. HT1009308 Cone Washer 7. HT1009309 Impeller 8.
Manual No/Rev W79-007E / 4 Operators Instructions for HYDRAFLOW S3T Hydraulic Submersible Pump 9. SPARES & SERVICE SPP Pumps operate a comprehensive Spares and Service support network throughout the world, and can be contacted as follows: SPARES & SERVICE Telephone: For spare parts, supply only. ask for - For breakdowns, spare parts and on-site fitting, pump installation and commissioning, and service contracts. ask for For breakdowns outside office hours.
