User's Manual

1
Introduction
Congratulations! You have purchased one of the finest personal wireless coverage systems available on
the market. The content of this manual complements the Spotwave
®
ZEN Quick Install Guide and
provides specific details that may be referred to if necessary during installation of a ZEN coverage system.
No Special Knowledge Or Equipment Needed
Installation of your ZEN system does not require any specialized technical knowledge. The system can be
installed by any person(s) with the ability to use a screwdriver, and in some situations may require the use of
a ladder, drill, and additional related tools.
ZEN System at a Glance
The purpose of the ZEN system is to enable personal wireless communications in specific locations within
a wireless service area where cell phones do not work, or work poorly, for example inside a basement, or
at the cell boundary.
The ZEN system receives signals from one or more wireless base stations and relays the signal to areas
where cell phones do not work or work poorly due to obstructions or the remoteness of the location.
The basic ZEN intelligent coverage system is comprised of a Network Access Unit, a Coverage Unit and a
power supply. The Network Access Unit is the outward facing part of the system that communicates with
the base station or cell tower. The Network Access Unit is connected (via coaxial cable) to the Coverage
Unit which provides wireless coverage to indoor areas.
Network
Access
Unit
Coverage
Unit