User's Manual

3
Installation
ZEN is a simple-to-install system that includes everything you need. The basic steps for installing your
system are to first locate the best signal within 35 feet of the area requiring coverage and then mounting
the Network Access Unit and Coverage Unit.
Before you begin
The following are general considerations and preparations that should be looked at before installing the
ZEN coverage system.
Signal Strength
The ZEN system brings signals from an area of
adequate coverage to an area with poor or non-
existent coverage. It is the Network Access Unit which
captures a good signal, and the Coverage Unit that
provides the signal to the area with poor cell phone
coverage. The Network Access Unit can be mounted
inside or outside, as long as it is in an area where your
cell phone works.
Generally, the better your cell phone works at the
location the Network Access Unit is to be mounted,
the better the system will perform.
Network Access Unit Location and Height
Locating the Network Access Unit on an
exterior wall and as high as possible will
usually provide better performance.
Locate the Network
Access Unit where
your mobile phone
works best