User's Manual

17
ZEN System Specifications
Note: Spotwave has the right to change specifications without notice.
Coverage Unit indicators
The Coverage Unit has one blue LED power
indicator on the front of the unit.
Network Access Unit indicators
The Network Access Unit has one mult-color LED status
indicator on the bottom of the unit. The meaning of each
status LED color is listed in the table below.
LED power
indicator
LED Color Status
Off No power or in mute mode. Mute mode can occur when a mobile phone or the
Coverage Unit is too close to the Network Access unit. Product is not providing
any coverage
Blue Power on, no faults.
Blue
flashing
Power on and system is functioning, but with reduced coverage due to poor isola-
tion between the Network Access Unit and the Coverage Unit.
Red Hardware fault condition. System needs to be replaced.
Red
flashing
Mute mode, (could indicate that a mobile phone or the Coverage Unit is too close
to the Network Access unit). Product is not providing any coverage.
LED status
indicator