User's Manual

Digital Repeater User Manual

- 26 -

FCC/IC STATEMENT

Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

Check the input

power of the

repeater

1) Use power meter to measure

the voltage of power socket,

if abnormal, change a socket.

2) Measure the voltage of the

adaptor, change the adaptor if

abnormal.

3) Replace the repeater

Check the gain

setting is

appropriate

Problem Solved

Contact manufacturer for help.

Yes

If the LED alarm is OFF, use

OMT to adjust attenuation until

LED alarm get normal.

Adjust the direction of donor

antenna or change its

installation position to get the

proper input signal, adjust the

direction of server antenna to

get the best signal level for the

coverage area.

Fasten the connectors; replace

damaged RF cables or

connectors.

Yes

Check the direction

of antenna, RF cables

and connectors