User's Manual

Digital Repeater User Manual
- 10 -
7.1 Installation Location Requirement
1) It is appreciated that the repeater is installed in a cool, dry and ventilated room without erosive gas and
smoke and without leakage on its proof.
2) Besides above, a cool and ventilated wall of which sun-proof and waterproof is expected.
3) Besides above, common wall, tower or high pole is ok.
4) Installation height should be easy for RF cable wiring, heat dissipation, security and maintenance.
5) Have a set of independent and stable power supply.
6) Have lightning conducer in the building, tower or high pole with enough strength or stability.
7.2 Power requirement
Generally it is AC power supply, and the requirement of AC is 100~264VAC/55±5Hz.
7.3 Installation tools and accessories
No. Name Specification Quantity Remark
1
Expansion screw
M10*100 4
Standard accessories
2
Expansion screw
M6*35 8
Standard accessories
3
Grounding screw
M6*22 1
Standard accessories
4 reciprocating drill 1
Engineering-owned, punch the
wall
5 Shot bit M6 1
Engineering-owned, punch the
wall
Recommend Splitter:
Frequency(MHz)
1710-1990 2110-2170
Splitter 2-Way Splitter -3.6 -3.8
3-Way Splitter -5.2 -5.4
7.4 Installation of donor antenna
The repeater’s main function is to improve weak RF signals to an area. A simple formula: Input power+ Gain=
Output power. The signal strength from the outdoor antenna directly affects the efficiency of the indoor coverage.
It is very important to choose the location of the outdoor antenna carefully. With this in mind, it is not