User Manual

MOUNTING THE DU AND CU
28 SpotCell
®
2500Xe
2. If the AC adapter can reach the end of the 6 ft (2m) cable (that ships already
attached to the DU) then simply attach the BIAS-T to the DU cable and the cable
coming from the CU.
Figure 3.9: BIAS-T inserted near DU
or
If the DU is too far from the AC outlet, cut the coaxial cable at the chosen location,
properly terminate both ends with Spotwave approved connectors, and attach the
the BIAS to the two new connectors.
Figure 3.10: BIAS-T inserted far from DU
3.
Connect the power supply to the BIAS-T and then plug the adapter into an AC
outlet.