User Manual

INSTALLATION
12 SpotCell
®
2500Xe
2. Temporarily connect the DU to the port labeled on the top of the CU with
copper core coax cable. The 6 ft (2 m) cable already attached to the DU can used to
make this temporary connection.
Figure 2.4: Temporarily connect CU to DU
3.
Connect the power supply to the CU and plug the power supply adapter into a wall
socket.
Figure 2.5: Connect power to CU
Note: Only use the power supply provided with the SpotCell 2500Xe system.
Connecting a power supply from another SpotCell system may damage the unit and
cause it to fail.