User Manual

INSTALLATION
10 SpotCell
®
2500Xe
2.2.2 SpotCell 2500Xe Auxiliary CU
The SpotCell 2500Xe Auxiliary CU kit is shipped with the following components:
Auxiliary CU - this is the second indoor part of the system.
Power Adapter - to be plugged into an electrical outlet and connected to the CU.
Mounting kit
Figure 2.2: SpotCell 2500Xe Auxiliary CU kit
Note: The coaxial cable needed to connect the CU to the DU can either be ordered from
Spotwave Wireless or can be supplied by the installer.
2.2.3 Hidden Cable Kit
The Hidden Cable kit makes it easier to hide the RF and power cables that are normally
connect directly to the CU.
The Hidden Cable kit is shipped with the following components:
90º F connectors (2)
BIAS-T (power inserter)
Figure 2.3: Hidden Cable kit
The BIAS-T (power inserter) is for indoor use only and cannot be installed outdoors.
2.2.4 Outdoor Self-Install Kit
The parts that are supplied with a standard SpotCell 2500Xe system are for indoor
installation and do not cover all possibilities. Additional hardware required to mount the
DU outside is provided in the optional Outdoor Self-Installation kit. This kit includes items
such as extra angle mounts, cable and a grounding block.
CU
Power
Supply