User's Manual
Table Of Contents
- Technical Support
- Important Safety Information
- LIMITED WARRANTY AND LIMITATION OF LIABILITY:
- 1 - Introduction
- 2 - Getting Started
- 3 - Installation
- 4 - Mounting the DU and CU
- 5 - Display Information
- 6 - Trouble-Shooting
- Appendix A - SpotCell 100 System Specifications
- Appendix B - SpotCell 111/112 System Specifications
- Appendix C - SpotCell 163 System Specifications
- Appendix D - SpotCell 167 System Specifications
- Appendix E - SpotCell 141/142 System Specifications
- Appendix F - Safety Hints
DISPLAY INFORMATION
SpotCell® 100 Series 23
All OK.
No action required.
Signal weak, but
working.
No action required.
Turn the DU to
another appropriate
position.
Move the CU to an
alternate location,
preferable farther
away from the DU.
Move the CU to an
alternate location,
preferable farther
away from the DU.
Temporary loss of
service.
No action required
Loss of service for
more than 24 hours.
Turn the DU to
another appropriate
position.
Display with alternating display (if present) Action (if required)
Table 1: CU Display States