User's Manual

Spotwave Wireless Inc. 21
5 – Display Information
5.1 DU LED Color - 2nd Rotation
Figure 5.1: LED on back of DU
LED is RED: The DU is either not capturing an adequate
signal for the system to operate, or capturing one that is
too strong for the system (rarely the case).
LED is YELLOW: The captured signal is within range and
the system will function, but it is not the strongest signal
available at the present location.
LED is GREEN: The DU is capturing a signal that is either
the strongest one available at the present location, or
nearly so.
5.2 CU LED Color
Figure 5.2: CU LED
OFF = NO Power
RED = Power + Install Mode
or
RED = Power + Active Mode + Alarm
GREEN = Power + Active Mode + NO Alarm
DU LED
CU
LED