User's Manual
Table Of Contents
- 1 – Introduction
- 2 – Getting Started
- 3 – Installation
- 4 – Mounting the DU
- 5 – Display Information
- 6 – Trouble Shooting Information
- Appendix A – SpotCell 100 System Specifications
- Appendix B – SpotCell 111 System Specifications
- Appendix C – SpotCell 112 System Specifications
- Appendix A – Safety Hints
SPOTCELL 100 SYSTEM SPECIFICATIONS
Spotwave Wireless Inc. 33
A.3.3 Physical
A.3.4 Installation
A.3.5 Diagnostics
Operating Temperature Donor unit: -40° to +55° C
Coverage unit: 0° to +40° C
Size Donor unit: 15"w 12" h 4" d
Coverage unit: 9"w 7.25" h 2.5" d
Weight Donor unit: 4 lb (2 kg)
Coverage unit: 2 lb (1 kg)
RF Connectors Type F, outdoor unit supplied with weather proof boot
RF Cable RG6 Quad shielded 82’ or 25 meters supplied
(System supports up to 164 ft. or 50 m)
Installation Time Less than one hour typical
Outdoor Unit Alignment No prior knowledge of base station location required
Built in alignment algorithm (LED Indicator on outdoor
unit)
Te s t E q u ip m e n t None required
No RF knowledge required for installation
User Controls None, setup and operation is fully automatic
Fault Indicators LED on DU (during installation only)
LCD indicator on indoor unit
Remote Connectivity Serial data port on indoor unit
System Interrogation LCD indicator on indoor unit