User's Manual

Spotwave Wireless Inc.
17
4 – Mounting
All components required for mounting on internal/external walls, as well
as pipes are included in the mounting kit.
4.1 Running the cable through a wall
If it is necessary to run a cable through a wall, use a masonry or wood
drill bit to drill a 5/8-inch diameter hole.
After passing the cable through, use the putty in the installation kit to
fill the hole around the cable.
4.2 Mounting the DDU
The DDU has two brackets which can be used for mounting the unit.
Figure 4.1:Mounting brackets
Bracket #2 is optional, and is only be used when mounting the DDU
with the face tilting left, right or down. The following illustration
illustrate the the various mounting options.
Figure 4.2:Mounting options