Safety Notice
Table Of Contents
- 1 – Introduction
- 2 – Getting Started
- 3 – Installation
- 4 – Mounting
- 5 – Displayed Information
- 6 – Trouble Shooting Information
- Appendix A – Applications overview
- Appendix B – System Specifications
- Appendix C – Safety Hints
M
OUNTING
20
SpotCell 100, Release 1.0
4.3.3 Attaching the cable
While securing the cable, ensure that a drip loop is fashioned near the
DDU (to prevent water from collecting around the cable where it
attaches to the DDU) and secured in place as shown in Figure 4.7:“Drip
loop” below.
Figure 4.7: Drip loop
Fashion the drip loop and fasten a black tie wrap around the loop to
keep the loop fastened.
To attach the cable to an existing pipe or cable run:
Use tie-wraps to attach the cable to an existing pipe or cable run.
To attach the cable to wood or siding:
Secure the cable to the wall using a cable loop strap as shown below.
Mount the loop strap directly to the wall where possible using a #6 x
1.5” wood screw.
Figure 4.8: Cable strap