Safety Notice
Table Of Contents
- 1 – Introduction
- 2 – Getting Started
- 3 – Installation
- 4 – Mounting
- 5 – Displayed Information
- 6 – Trouble Shooting Information
- Appendix A – Applications overview
- Appendix B – System Specifications
- Appendix C – Safety Hints
I
NSTALLATION
10
SpotCell 100, Release 1.0
4.
Plug the power supply adapter into a wall socket
5.
Ensure the switch on the SCU is in the ‘Install’ position.
Figure 3.2: SCU switch location
6.
To align, hold the DDU upright and:
7.
As you are rotating, you will notice that the LED on the back of the
DDU will light up green, red or amber; this is normal.
Indoors Roof External wall
Rotate the face of
the DDU from left
to right in front of
the window.
If not in front of a
window, rotate the
DDU in a complete
circle.
Rotate it in a full
circle. A time of 10
seconds is
appropriate to fully
complete the
rotation.
Rotate the face of
the unit from left to
right within the
constraints allowed
by the wall.
SCU
switch
window
wall